Bluetooth is a device that can achieve wireless transmission in a short distance. Bluetooth headsets are the most widely used electronic products in life. Not only does it answer the phone on the mobile phone, it frees people's hands, especially when driving, you can talk while driving. You can listen to songs and chat on the computer, and you can do things while listening to songs. Not only that, but Bluetooth headsets are still far away from electronic products and protected from the effects of electronic waves on the human body. There are so many benefits of Bluetooth headsets, but there are many friends who do n’t know how to use the headset after buying it, so how to connect the Bluetooth headset to the computer? How to turn on the computer Bluetooth? Let's talk about its operation steps in detail.
To connect a Bluetooth headset to a computer, first your computer must support Bluetooth, and a Bluetooth adapter is required. Some laptops have a Bluetooth module (Bluetooth adapter) and a Bluetooth driver in the system, so just open the system program, but some computers do not have a Bluetooth program or no Bluetooth module at all So first of all, we will be equipped with a Bluetooth adapter, so that the computer supports Bluetooth (if you have a Bluetooth module, you don't need it). How to connect the Bluetooth headset to the computer can refer to the following methods:
1. Under the condition of Bluetooth adapter, make sure that the computer has Bluetooth driver software installed. If not, you can go to the next software (BlueSoleil) on the Internet. Note that the XP system comes with a Bluetooth driver software, but it can only transfer files, not audio. Therefore, to listen to songs, chat, etc., you need to download one again.
2. After installing the software, plug in the adapter (if you do n’t need it on your computer), open the software. Double-click the icon shown in the figure below, press and hold the headset power switch for 8 seconds, the green indicator light flashes quickly, and the headset is paired. 
3. The software will automatically search, when the headset is found, the headset icon will appear, then right-click to select the pairing option. 
4. After selection, the Bluetooth input password interface will appear, enter the password 0000 here. Some headsets have different passwords, which can be found on the description of the headset or on the label on the back. 
5. After the password is entered correctly, the words Paired will be displayed and the connection time will appear. 
6. Right-click and select the search service option. After the search service is successful, the headset icon is lit. 
7. If you are listening to music or watching a movie, right-click and select the option to connect Bluetooth high-quality audio 
8. After the selection, the icon for establishing a connection will pop up automatically. After a successful connection, the connected characters will appear. At this time, you can enjoy music and movies. 
9. If you are calling or chatting, finally disconnect the Bluetooth high-quality audio, otherwise it will affect the transmission speed. Right-click on the headset icon and select Connect Bluetooth Single Headset. 
After installing the driver, the Bluetooth high-quality audio headset and Bluetooth mono headset are connected in two modes and the sound is severely distorted when playing music (the headset has a large noise when the music playback is paused), and then the Bluetooth mono music headset is turned off and there is no sound. If you use the telephone transmission protocol (HSP), you can only transmit the same voice quality as the phone, so the effect of listening to music is naturally not good, please use the HFP protocol, which can transmit high-quality audio data transmission; the sound will become better; please Use high-quality audio transmission protocol. 
The above is the method of connecting the Bluetooth headset to the computer. Of course, there are many other small softwares. Here is just an example.
This Automation curtain is specially designed for automation industry. SDKELI LSC2 light curtain is designed for automation field, with small size, compact structure and strong anti-interference ability, and the product meets IEC 61496-2 standards. The automatic light curtain is with reliable quality and very competitive price. It has been used in many factories and has replaced curtains from Sick, Omron, Banner, Keyence, etc.
Automatic Light Curtain,Laser Light Curtain,Automation Light Beam Sensor,Automatic Infrared Beam Sensor,Infrared Beam Curttain Sensor,Infrared Beam Sensor
Jining KeLi Photoelectronic Industrial Co.,Ltd , https://www.sdkelien.com