Touch screen program backup - solution - Huaqiang Electronic Network

Spot Remarks 2017+

SMD aluminum electrolytic capacitor

Programmable Package SG-8018CA(SG7050C) 0.67M~170M

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

What software does the touch screen use for backup, can I use Wincc for touch screen program backup?
Answer: 1. To back up the touch screen program, you can use the “backhaul” function. In doing so, you must have the following two conditions -
1) The touch screen supports the memory card function and has a memory card;
2) When downloading the touch screen program, check the "Allow return" option.
If this is the case, you can use a PC to connect to the touch screen and upload the program inside the touch screen.
2, or you can also use the backup function of the touch screen, that is, the Restore function on the touch screen, this can be used to backup the program and restore to another touch screen.
The touch screen uses memory card data backup:
In the "Control Panel" of the touch screen - Backup / Restore, select Backup, copy the operating system, applications and data of the touch screen from the internal flash memory of the hmi device to the memory card; then to the "Control Panel" of the new touch screen "--Backup/Restore, select Restore, all data in the flash memory of the new touch screen will be deleted, and the data stored on the memory card will be copied to the internal flash memory.