Temperature sensor technology is very mature, and it is very common in various factories. Temperature sensors are often used with some instruments, and there are often some small faults in the matching process. Therefore, here are a few common faults and solutions after encountering a fault:
First, the transmitter output does not change when the temperature of the measured medium rises or falls. This is mostly a problem of temperature sensor sealing. It may be because the temperature sensor is not sealed or the sensor is accidentally soldered during soldering. A small hole, this situation generally needs to be replaced by the sensor housing.
Second, the output signal is unstable. This reason is the cause of the temperature source. The temperature source is an unstable temperature. If the meter is unstable, it is the reason that the meter's anti-interference ability is not strong.
Third, the transmitter output error is large. There are many reasons for this. It may be that the temperature sensor of the selected temperature sensor is not correct, resulting in a range error. It may also be that the sensor is not calibrated when it leaves the factory.
The temperature sensor failure is rare. As long as it is carefully tested at the factory, these conditions can be avoided. Therefore, the temperature sensor should be inspected at the factory, and the customer can also ask the sensor manufacturer for a factory inspection report. For reference.
10000Puffs Disposable Vape,100000Puffs Vape Pen,10000Puffs E-Cigarette Vape,Disposable E-Cigarette Device
Shenzhen Uscool Technology Co., Ltd , https://www.uscoolvape.com