Smart home audio and video switch features and installation wiring

The smart home audio and video sharing system can use a set of digital TV set-top boxes, DVD/VCDs, satellite TVs, and cameras to watch the programs of any device on the TV in any room, and can watch different programs in different rooms. , can share the same program at the same time.

Smart home audio and video switch features

(1) It is especially suitable for homes, flats, restaurants and entertainment venues with multiple TV sets.

(2) Applicable to various program sources: digital set-top boxes, satellite receivers, IP set-top boxes, DVDs, etc.

(3) 3-way program source input, 3/4 channel program source output, no blocking exchange.

(4) Remote control of each source.

(5) Environmental protection, low power consumption.

(6) Signal Format:

1) Video: Full-system composite video signal (NTSC/PAL/SECAM).

2) Audio: Analog Stereo

(7) audio and video sharing eight input and eight output devices, the external dimensions of 430 wide>

(8) Mainframe specifications Quad audio and video (AV) input.

(9) Quad video input.

(10) Octal audio and video output.

(11) Peripheral Configure a repeater.

(12) Two receiving boxes.

(13) Three remote controls.

(14) Four AV panels.

(15) Optional accessories (dedicated) receiver box, remote controller, (general) AV panel, AV cable, and data plane.

Smart home audio and video switch installation wiring

The descriptions of the two groups of stereo audio output terminals on the upper left corner of the smart home audio and video switch are as follows:

(1) First audio source extension output: The first group output is directly output in parallel with the first audio source, and is used when the user wants to send the first audio source to the audio and video switch and wants to send the audio source to other view-distribution devices.

(2) No output of the first channel: The second output is the no-power output of the first sound output channel, which is convenient for users to use their own power amplifier equipment.

Note: The maximum output power of each sound channel is 15W.

Smart home audio and video input using standard audio and video cable input from VCD or other audio and video sources, can only lose 4 audio sources and 4 video; audio and video switch third audio source with M1) 3 playback capabilities, can be through the USB The interface plugs in the U disk as the third MP3 audio source; the fourth audio input defaults to the built-in FM FM radio source, so no audio source is added to the fourth channel (unless the local cannot listen to the FM radio).