This power industry is constantly evolving and the products on the power line are constantly updated. In the market, the quality of the products is uneven, and the customers of the products on the power need to be cautiously purchased. After all, the safety of electrical products is the first. Do not buy fake and shoddy products. It doesn't matter if you buy or not, at least you can go to other stores to buy. The mineral cable accessories we produce are produced using the finest primary copper (model: CW617N, 59-1A), and the standard of production is according to European and American standards. And we can produce according to customer requirements. At present, we can produce copper pipe products which can be in 8373; 9-8373; 80, the wall thickness is greater than 5mm.
Overview of mineral cable heads:
Use of mineral cable terminations: Before the cable is energized, a permanent terminal is used to connect the cable to the electrical equipment. The terminal has two functions: one is to use the cable insulation material (magnesium oxide) to isolate from the outside for sealing purposes, and the other is to connect the cable to the switch cabinet to be fixed by the electric equipment. Thus the terminal head consists of two parts:
Sealing part: generally consists of yellow can (or heat shrinkable tube), can lid, sealing material and insulating sleeve of conductor!
Gland part: generally consists of gland body, compression ring and compression mother
Mineral cable intermediate connector advantages use:
Since the length of the mineral insulated cable is limited by the length of the cable raw material (the length of the copper sheath with the copper tube), the cable is installed in the process of cable laying, and the intermediate connector is required. Two cables of the same specification are connected together to ensure that the length of the line is met. The two ends of the coupling are composed of internal thread seamless pipe, copper crimping pipe and insulated heat shrinkable shrink sleeve and other accessories!
Mineral cable terminal (nose)
The cable is used to connect conductors and control cabinet posts or power supplies during installation. It consists of a press-fit nut, a press-fit oblique, and a terminal body!
There are two types of mineral cable terminals (wire nose):
1. The crimping type terminal block is suitable for the connection of cables above 35mm2:
Second, the press-fit type terminal block is suitable for the connection of 4-25mm2 cable:
Mineral insulated cable branch box (box)
The branch box (box) is mainly suitable for real 'radiation' wiring in multi-core small-section cable control lines. It can not only connect cables of the same specification, but also different specifications, different types of cables can be transferred through the branch box. It solves the problem of branching of mineral insulated cable anywhere and any place, and also solves the special flame retardant and fire resistance of the general refractory plastic cable branch.
A slip ring is an electromechanical device that allows electricity and data to pass through a rotating assembly. A mercury slip ring uses liquid mercury as the electrically conductive element inside the rotating assembly, as opposed to traditional carbon brushes. Mercury is a better conductor of electricity than carbon, and it also has a very low contact resistance. This makes it an ideal choice for applications that require high-speed data transmission or where reliability is critical. Mercury slip rings are used in a variety of industries, including medical technology, aerospace, and defense.
A slip ring is an electromechanical device that allows electrical current to pass between rotating objects. Slip rings are often used in applications where a cable or connector would otherwise twist and tangle as the object rotates. There are many different types of slip rings, but one of the most common is the mercury slip ring. Mercury slip rings offer several advantages over other types of slip rings, including high reliability, low maintenance, and long life. Here are three reasons why we choose a mercury slip ring:
1. Reliability: Mercury is an extremely reliable material, and mercury slip rings are among the most reliable types of slip rings available. Mercury has a very low failure rate, and it is not affected by changes in temperature or humidity. This makes mercury slip rings ideal for critical applications where reliability is essential.
2. Low Maintenance: Mercury slip rings require very little maintenance. Because mercury is a very inert substance, it does not corrode or generate any corrosive gases that would affect its reliability. Mercury slip rings do not require any lubrication, and they can operate in a wide range of temperatures and environments.
3. Economical Mercury slip rings have a lifetime cost advantage over other types of slip rings as well. Generally speaking, mercury slip rings are approximately 25% more expensive per kilowatt than other types of slip rings. However, because they require less maintenance and have a greater degree of reliability than other types of slip rings, they will save you money over the lifetime of your equipment.