Transformer cooling method - Solutions - Huaqiang Electronic Network

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
TP-IP4220CZ6 5V 0.35PF breakdown voltage 6V SOT
Shunuo varistor / ESD varistor / product complete / Sunlord first-class agent
Photocoupler

The cooling method of the transformer is determined by the cooling medium and the circulation mode; since the oil-immersed transformer is further divided into the internal cooling mode of the fuel tank and the external cooling mode of the fuel tank, the cooling method of the oil-immersed transformer is represented by four letter codes.
First letter: Cooling medium in contact with the windings.
O-------- mineral oil or insulating liquid with a burning point greater than 300 ° C;
K--------Insulating liquid with a burning point greater than 300 ° C;
L--------Insulating liquid that is not detectable in the ignition point;
The second letter: the way the internal cooling medium is circulated.
N--------The oil flow through the cooling device and inside the winding is a natural heat convection cycle;
F--------The oil flow in the cooling device is forced circulation, and the oil flow flowing through the inside of the winding is a heat convection cycle;
D--------The oil flow in the cooling device is forced circulation, at least the oil flow in the main winding is a forced guiding cycle;
The third letter: external cooling medium.
A--------air;
W--------water;
Fourth letter: The way the external cooling medium is circulated.
N-------- natural convection;
F-------- Forced circulation (fans, pumps, etc.).
The ONAN cooling method is a natural convection cooling method of the internal oil, that is, the so-called oil immersed self-cooling type.
ONAF: oil immersed forced air cooling
OFAF: Forced oil circulation forced air cooling
ODAF: Forced oil-directed circulation forced air cooling

FM Transmitter

A personal FM transmitter is a low-power FM radio transmitter that broadcasts a signal from a portable audio device (such as an MP3 player) to a standard FM radio. Most of these transmitters plug into the device's headphone jack and then broadcast the signal over an FM broadcast band frequency, so that it can be picked up by any nearby radio. This allows portable audio devices to make use of the louder or better sound quality of a home audio system or car stereo without requiring a wired connection. They are often used in cars but may also be in fixed locations such as broadcasting from a computer sound card throughout a building.

Fm Transmitter,Fm Transmitter System,Personal Radio Fm Transmitte,Fm Stereo Transmitter

Anshan Yuexing Technology Electronics Co., LTD , https://www.yxhtfmtv.com

Posted on