The old ORICO three-in-one hard drives are easy to use

Recently, the price of SSD solid-state drives is getting cheaper and cheaper. More than 200 can buy 120GB, and 400GB can buy 240GB. There are not many players upgrading SSDs. What about the mechanical hard disks that have been eliminated? ? Is it in the cupboard? In case you need to use it? It is a good idea to start the easy-drive line, and it can access the hard disk at any time. The old hard disk can be used at any time, greatly facilitating users. Then take a look at this easy drive line which can connect SATA hard drive or IDE hard drive.



This product is produced by Shenzhen Yuanchuang Times Technology Co., Ltd. ("ORICO"). ORICO has always been a leader in the peripheral market. The quality is very good. The box continues to use the classic kraft box + color set.


Product model is: U3TIS, support USB3.0, speed up to 5Gbps, with older hard drives more than enough.


The bottom of the box reveals the name of the product: three-in-one, multi-use, easy-to-drive lines.


Out of the box, the host of the easy drive line here, the lower part of the box is a variety of accessories, such packaging is ORICO style: compact, compact.


The family portrait is here: one power adapter, one host for easy drive, one power cable for AC power, one power cable for four-pin hard drive, one warranty card, and one manual.


Easy to drive line host work well, although the shell is plastic, but the use of a special process to create a silicone feel, slip resistance is very good. Three hard disk interfaces are configured in three directions: SATA hard disk interface, 3.5-inch IDE hard disk interface, and 2.5-inch IDE hard disk interface. As the IDE interface has long since been phased out, the new motherboards have long cancelled IDE interfaces, resulting in the old hard disk is no longer available on the new host, and this easy drive line configuration so complete interface, the old hard drive can also glow The second spring.


The bottom part is simply labeled with performance parameters.


This side is the most important one. A switch is designed on the left side so that the power can be switched on and off without a plug, which is very convenient. The middle is the 12V power interface, which must be connected, otherwise the hard disk can not work, the right 4pin power interface is prepared for the IDE hard disk, using a fool-proof design, effectively prevent the reverse plug to cause hardware damage.


The power adapter adopts an ordinary 8-shaped interface connection.


The power output of the power adapter 12V4A is sufficient to ensure the stable use of the hard disk. Since the power consumption is very low, the temperature of the power supply during operation is not high, and it is just a slight heat.


Connected to the hard disk can be started, connected to the power, open the switch immediately can access. Here to say more, easy to drive line can only connect one hard drive at a time, if you connect two hard drives at the same time, such as connecting SATA hard drive and IDE hard drive at the same time, you can only access the IDE hard drive, SATA hard drive can not identify correctly, this is all easy The common problem of drive products is not the issue of ORICO. Just remember to pick up one hard drive at a time.


The indicator light in the middle of the main unit will be on during operation, and it will continue to flash as data is accessed. It will also look cool.


To use the IDE hard disk, the connection of the 4pin power supply interface is indispensable, and the length of the self-contained cable is just right. It can be seen that connecting SATA hard disk is the most convenient thing.


The computer automatically recognizes it and is completely plug-and-play, eliminating the need for additional drivers. Thanks to the product's support for USB 3.0, it is possible to see the Easy Drive support UAS protocol. This is a feature that only USB 3.0 has. It has the ability to handle multiple commands in parallel, as well as mechanisms for task management and control. It also supports the NCQ function. It can almost be regarded as the USB3.0 version of SATA, and high-speed transmission is guaranteed. (Ordinary products support the BOT mode. It can only transmit 1 set of control commands to write data and read data at the same time. Therefore, it is called half-duplex transmission mode. SLOW.)

to sum up:

ORICO's three-in-one easy-to-use drive line is very stable in use, there is no test hard disk read and write speed, because ordinary hard disk transmission speed is not high, easy to drive line has support for USB3.0, interface transmission speed Up to 5Gbps, the transmission bottleneck is on the hard disk, and the speed measurement has no meaning. The use of the product is very simple, can be used to connect, this product is very convenient to replace the hard disk, suitable for occasions that need to temporarily read and write the hard disk, of course, long-term use is no problem, regardless of power or host, the heat is very low, run Stability is the most important. The product itself is very light, portable, and support IDE hard disk is also a big advantage, come to a home, the old hard drive at home is full of blood.


Smart TV/box information can focus on smart TV information network sofa butler (http://), China's influential TV box and smart TV website, providing information, communication, TV boxes, smart TVs, smart TV software, etc. Answering questions.


Connectors overmolding

Overmolding the Connectors offers significant opportunities for cable improvements with higher pull strength and waterproof issue for those parts, which without these characteristic by conventional types.Such as jst jwpf connector. Just be free to contact us if you need any wire-harness solutions or partner for your products. Our professional and experienced team would support you by satisfied skill and service.


Molded Connectors,Molded Waterproof Connector,Molded Straight Wire Connector,Jst Jwpf Connector

ETOP WIREHARNESS LIMITED , http://www.wireharness-assembling.com

Posted on