B&O's name began in 2007 when I bought the first A8 earphone in the B&O store in Shanghai's Hang Lung Plaza. It has been more than 8 years since now, and the A8 has been in service and it is really durable.
H7 and H8 have two different points. The first H8 is the ear type, and the H7 is the ear. I personally feel that the H8 is pressed. If the glasses are worn for a long time, the ears are still uncomfortable, but the H7 is the head. The pressure on the department is concentrated on the beam. I have been wearing H8 for a while, and it may be a preconceived relationship that makes the H7 very unsuitable.
The box is packed, and the refreshing theme is clear at a glance.
Numbering.
Left side.
Right.
The back has a basic function introduction.
In fact, it is a fake box, the headset has been used for almost a week.
Family portrait, H7 also sent a gift card, you can go to the store to change a charging treasure, of course, only the headset can be charged, the phone is probably still not full charge.
H7's khaki metal part color is silver, I personally prefer gold ···.
Part of the earmuffs.
H7 and H8 contrast, note that H7 does not have a noise reduction microphone hole, both headphones can be used directly as a Bluetooth headset, very convenient.
The texture of the metal is very good, pay attention to the difference between the physical and packaging photos, the leather color of the H8 is closer to the box.
This is a blue paired light, this is already connected.
The texture of metal wire drawing is very charming.
It is said to be lambskin.
This is the maximum range that the metal rod can be pulled out.
The battery is the same as the H8 and can be replaced.
The battery capacity is not high, but it is used lightly. It has only been charged once a week, and it may save more power without noise reduction. H8 I will charge it in four days.
This is a preview of H8. I will post H8 in two posts.
The noise reduction effect of the H8 headphones is very good, but the interference to the ears is still a little uncomfortable when there is no music in the standby, and the H7 does not have this problem. If you do not need the noise reduction function, and do not catch the earphones, then H7 Estimated to be a good choice, after wearing the headphones, the sound performance is good, of course, when driving, it is safe to listen to, I wear H8 to open long distance listening to the song, the outside car noise is almost reduced by three points only, about the battery life, I try Try to use up the battery, in fact, the battery is not good, it is best to use almost to charge, because the original battery looks like 300, Bluetooth connection standard I do not understand, but the personal feeling can only be considered in the middle distance, When I connect my Android device, when I walk in my trouser pocket, the H7 and H8 will also have occasional unstable connection performance (the same SONY NW-M505 Bluetooth MP3 does not have this phenomenon) but I am not sure if it is me. The problem with the NEXUS6 mobile phone has not been connected to the iOS device yet. It will not be very portable and light, but it will be very portable and light, but the rate of returning is very high. Finally, let's talk about the sound quality. I don't like to pursue I don't like over-sounding headphones. I usually like to listen to light pop music, and I have been affected by A8 for a long time. It can be said that A8 has been with me for 7~8 years. This kind of sound is very personal, I am in the late stage. When choosing a headset, in addition to B&O, it will only be selected in the earphones of the iron triangle, which is relatively clear. If the H8 is noise-reducing, it will naturally increase the bass, so I generally don’t open the noise to listen to the song. The noise reduction of the H8 is turned on by default. After each connection to the mobile phone, remember to manually turn off the noise reduction function. In fact, I will only use the subway when I am doing the subway, or take a long-distance bus. When I open it, H7 doesn't have this trouble, because it doesn't have noise reduction at all! I also tried to connect the player directly with the headphone cable. The sound quality doesn't know whether it is the illusion of my brain, or what reason, it feels cleaner and clear. I am not a headset metaphysical party, I just said the personal feelings, A8 was positioned at the time, the resolution is high, the position of the instrument for the symphony will feel particularly clear, but it seems that H8 and H7 did not inherit this point, I do not know Is it not open? In the end, I feel that the pronunciation units of H7 and H8 should be exactly the same. The sound quality is purely personal. If you have different opinions, it is normal. After all, because of the age, each person’s ear has a difference in hearing. The big thing, the key is to listen to what you like.
H7 and H8 have two different points. The first H8 is the ear type, and the H7 is the ear. I personally feel that the H8 is pressed. If the glasses are worn for a long time, the ears are still uncomfortable, but the H7 is the head. The pressure on the department is concentrated on the beam. I have been wearing H8 for a while, and it may be a preconceived relationship that makes the H7 very unsuitable.
Optical Fiber Protection sleeves are used for holding and protecting fusion fiber splice point. XXR offers single fiber protection sleeve and ribbon fiber protection sleeve which could meet kinds of installation needs from our customers. We also offer special dimensions according to customized requirement.
Features
Transparent plastic tube
material:Stainless steel rod, Ceramic bar and glass bar
Prevents stress and protects fusion fiber optic splices in field and factory operations
Sleeves are made of ethylene vinyl acetate (EVA)
Sleeves have heat-activated memory which causes them to shrink under heat
Sleeves shrink tightly to exclude air and hold the rod firmly, preventing abrasion of delicate glass fibers
Applications
1. Use the enhanced wire, hot-melt tube and cross-linked polylefin composition
2. Reconstruct the fiber coating
3. Junction to provide a good mechanical strength
4. Ensure good optical transmission properties
Heat Shrink Sleeves,Heat Shrink Tubing,Heat Shrink,Shrink Tubing
Chengdu XingXingRong Communication Technology Co.,Ltd , http://www.xxrtx.net