Feldhan pointed out that looking at the deterioration of the macroeconomic situation and the decline in consumer spending, the semiconductor industry supply chain began to step on cars and consume inventory; he believes that the tense manufacturers should continue to invent the stock market from the end of 2011 to 2012. It will also show a slowdown in the pace of its business development, and it is expected that the overall industry's capacity utilization rate will be reduced from 90% at the beginning of the year to 80% at the end of this year.
However, Feldhan also stated that the destocking of manufacturers will cause the industry recession time to be shorter than expected; Semico Research's Inflection Point Indicator economic model predicts that the current industry recession period will bottom out in February 2012. Therefore, it seems that the overall time is about three quarters: "Our expectation is that we can see that the industrial economy is at its lowest level in the next year."
Semico lowered its forecast for 2011 semiconductor market growth rate last month, reducing the original 6% to -1.4%; however, the agency predicts that the chip market will rebound by 8% in 2012. Feldhan pointed out: "We have not seen any short-term catalysts that could reverse the direction of the semiconductor market in the coming months."
4.2mm Wire To Board Connectors
4.2mm Wire To Board Connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.
4.2 mm pitch connectors wire to board connectors
Fully isolated terminals, positive locking housings, low-engagement forces and polarized housings, also offers blind mating, TPA and higher current options. Pitch 4.20mm
4.2 mm pitch connectors wire to board connectors Including:
male housing
Male housing of connector, UL94V-0 and UL94V-2, hanging and panel mount, single row and dual row, 2 to 24 circuits.
Female housing
Female housing of connector, with locking latch in order to avoid loosing, and with polarity in order to avoid dis-mating. One row and dual rows, from 2 circuits to 24 circuits.
Terminal
The conductor of connector, brass or phosphor bronze, tin plated over nickel, selective gold plated as customer's requirement.
Header
Header, right angle and vertical , with peg and without peg, DIP soldering, single row and dual row, 2 to 24 circuits.
4.2 mm connectors wire to board connectors General Specification:
Current rating: 6A AC, DC.(AWG#18)
Voltage Rating: 600V AC,DC
Withstanding Voltage: 1500V AC/minute.
Insulation resistance: 1000MΩ min
Contact resistance: Initial Value/ 10mΩ max
Temperature rise: -40'C ~ 105'C.
Circuit Board Connectors,4.2Mm Wire To Board Connectors,4.2Mm Pcb Wire To Board Connector,4.2Mm Pin Wire To Board Connector,.165" Wire To Board Connectors,4.2mm Power Connector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com