Yjv22 Yjv32 Cu/XLPE/PVC/Swa/PVC 50mm 25mm 35mm Electric Cable 35kv XLPE Price High Voltage Power Cable

Product standard

XLPE insulated Flame retardant and Fire resistant Power cables are fixed laid in the circuit with frequency 50Hz and voltage up to 3.6/6KV.

We can produce Flame retardant and Fire resistant power cables according to standard GB/T19666-2002, Grade A,B,C or D.

Rated voltage 0.6/1KV and 3.6/6KV.

Conductor of cables can be Copper and Aluminum.

The cables can be single core, two cores ,three cores, four cores(include three main cores and one neutral), five cores(include three main cores and one neutral and one earthing core; Four main cores and one neutral).The cables can be with armor and without armor.

We can produce cables with PVC outer sheath., flame retardant PVC outer sheath or with fire resistant insulation. The cables are produced according to GB/T12706(eqv IEC 60502) and GB/T18380-2001(eqv IEC60332) or GB/T19216(eqv IEC60331) and or the BS, DIN or other international standards. And we also design and produce cables according to the requirement of our clients.

 

Application characteristics

1.Long term working temperature is up to 90 degree C.

2.The highest conductor temperature is not more than 250 degree C.(lasting time not over 5 seconds.)

3.Laying temperature not less than 0 degree C and the drop height is out of consideration.

4.The cable with chemical stability, anti acid, anti alkali, and oil, anti organic solvent, not easy to be burning.

5.Easy for installation, easy beading and light.

6.Bending ratio as follow:

 

 

 

Cable type, name and application

 

 

Product standard

XLPE insulated Flame retardant and Fire resistant Power cables are fixed laid in the circuit with frequency 50Hz and voltage up to 3.6/6KV.

We can produce Flame retardant and Fire resistant power cables according to standard GB/T19666-2002, Grade A,B,C or D.

Rated voltage 0.6/1KV and 3.6/6KV.

Conductor of cables can be Copper and Aluminum.

The cables can be single core, two cores ,three cores, four cores(include three main cores and one neutral), five cores(include three main cores and one neutral and one earthing core; Four main cores and one neutral).The cables can be with armor and without armor.

We can produce cables with PVC outer sheath., flame retardant PVC outer sheath or with fire resistant insulation. The cables are produced according to GB/T12706(eqv IEC 60502) and GB/T18380-2001(eqv IEC60332) or GB/T19216(eqv IEC60331) and or the BS, DIN or other international standards. And we also design and produce cables according to the requirement of our clients.

 

Application characteristics

1.Long term working temperature is up to 90 degree C.

2.The highest conductor temperature is not more than 250 degree C.(lasting time not over 5 seconds.)

3.Laying temperature not less than 0 degree C and the drop height is out of consideration.

4.The cable with chemical stability, anti acid, anti alkali, and oil, anti organic solvent, not easy to be burning.

5.Easy for installation, easy beading and light.

6.Bending ratio as follow:

 

 

 

Cable type, name and application

 

 

To increase battery voltage and capacity of a power system, cells have to be connected in series or in parallels. Due to unequal self-discharge and physical variations of the cells as different as it was made in factory, the State-Of-Charge(SOC) of the cells will differ sooner or later in the following no matter whether it been used or not. Therefore, the discharge process has to be stopped when one cell has reached its minimum voltage and the energy in the other cells is waste. The utilizable energy of a series circuit is limited by the weakest cell in the pack. To completely discharge all cells, weaker cells must be recharged. This process is called cell balancing or cell equalizing, which is much more energy-efficient than any other methods. And it is very important for prolonging battery lifespan due to reducing internal resistance and slowly sulfided.
Our Battery Equalizer is designed specially for Electric Vehicle Power, which it packed in series by 12V cells. The equalizer with smaller smart pulse is installed onto battery bank in everyday's driving. Keeping all the batteries in your electric vehicles equalized allows them to be completely charged and to give off a completely discharged. And make to give you a longer travelling distance and better experience. By adding our smart pulse equalizer to your vehicle power battery bank, the cell batteries are desulfated and equalized on a consistent basis so they will always be in as new ones. When there is no internal resistance in the cell batteries, there is less wear and tear when vehicles starting and being speed up. The total electrical power system benefits as the batteries are equal as in like new conditions.
Smart pulse Equalizing system for 48, 60, 72-Volt battery banks, patented pulse technology reduces and prevents sulfation buildup. Maximizes the performance of all lead-acid battery including VRLA, AGM, GEL and Flooded cell batteries.

Electric Vehicle Battery Equalizer

Electric Vehicle Battery Equalizer,Battery Equalizer,Power Battery Equalizer,Tricycle Smart Battery Equalizer

Shenzhen Daceen Technology Co., Ltd. , http://www.daceen-sz.com