Teach you how to make headphones sound better

How to listen to headphones ~

What is a headset? Everyone knows that new cars, machines, etc., must go through a phase called "running-in" before normal use, so that internal mechanical devices can fully coordinate and advance to the best state in advance. Similarly, the headphone's push unit (the speaker inside the headphone) is also a mechanical device. To be precise, it should be a semi-mechanical or semi-electronic combination. Therefore, the headphone also needs to be “running in” to be more perfect. The new headphones sound relatively low-frequency dive is not deep, the amount of sense is also smaller, stiff, IF performance is not soft enough, there are high-frequency burr, too sharp and other symptoms (of course, this is also determined by the quality of the headset itself) . After a while, the sound will be full and easy, and the sound quality will be better.

So how do you get your headphones? A dedicated frequency generator can be used to generate a fixed or scanned frequency and then input to the headset. This method is more effective and the time used can be shortened. But most players do not have this type of instrument; today, with the rapid development of computers, many enthusiasts have compiled programs to use the computer to process some waveforms, frequencies, and output through the sound card to achieve some real-world frequencies. The effect is the so-called “virtual instrument” crash. A very simple method that used to be popular is to connect the radio directly to a radio-free frequency and use the “beep” sound emitted by the radio (pink). Noise) Let the headset work for a long time to achieve the effect of the crash. But using this method is not so obvious. It's not as fast as wearing headphones and listening to music. Here's how to listen while listening: Use the test disc to play 12 to 24 hours at 30% to 40% of the volume, rest for a day and then choose to play different styles of CDs in succession for 5-10 hours (including vocals , symphony, electronic music, pop and AV live), then select your favorite CD with a higher volume (you can accept the maximum sound pressure, note that the volume can not be too large, otherwise it may damage the headset) Play 1 - 2 hours, and finally restore the medium volume to play soft music (such as Bandari or piano music) for 5 hours, to congratulate you, basically completed the downtime process.

The last point to emphasize is that not all headphones will make a good noise, which is determined by the quality of the headphones themselves. The effect of some headphones is not obvious. This is also normal. The purpose of our downtime is to help it quickly pass through the aging adjustment period and stabilize the physical characteristics of its components. The uncomfortable headphone vibration system may be relatively tight and relatively hard. By using a crash machine, its vibration system can be relaxed and the parameters can be stabilized, so the sound quality will become better.

Good talk about how to make good headphones

Good headphones must be embarrassing, but how can you? To what extent it is a knowledge. Discuss with you today how to get your headset.

Nowadays, more and more people begin to pay attention to the requirements of sound quality, and it is natural to have a good pair of headphones. But everybody bought it and used it to find it, and no one else talked about it so well. They began to wonder if they were buying fakes. In actual fact, a really good headset requires a listening process. This process is also what we often call “煲”.

Many people may not understand why headphones are embarrassing. In fact, this is just like the need to run in when the car was just bought. The headphone diaphragm itself has internal stresses in the manufacturing process. When the bonded voice coil and the fixed voice are assembled on the frame, assembly stress is generated. The headphone is what we call the gradual disappearance of these stresses, so that the diaphragm gradually and smoothly A good sounding process. If you start with a good "hit" earplug, then it will gradually loosen its membrane, so that when you listen to music, the shock will be very comfortable shake, the sound quality is also much higher than before. Therefore, it is necessary to use a headset.

煲 Headphones are not difficult, but they require time and certain skills. First of all, you need a source that can be used for long periods of time. Secondly, in the sound source, music with a wide frequency response range, soothing dynamic effects, clear gradation, and high-middle-bass components should have more effect than ordinary music. Another point is that the audio output power must be large enough, for example, to "hello" HD600 can not use ordinary walkman, HD600 is 300 euros, does not deserve amps simply can not bring up, but also how to loosen the diaphragm it? In general, the Walkman is only suitable for earbuds and some low-impedance headphones. In general, if you use computer sound cards and radios to “plug” earbuds, it will take longer. And use a CD player with a large output power to "squeak" and the time is shorter. Using FM is also the most convenient.

Here's a few tips for everyone to recommend:

Using the FM radio, tune the radio to a channel with no signal and control the volume below 20. The zzz sent by this time is equivalent to the dish of white noise we usually use. Buying a new headset probably takes about 8 hours a day for a week or two. Although this method is slow, it is safer. At least not because of improper operation of the headset smashed.

Using a CD player or an MP3 player to play different styles of music, it generally takes about 10 hours to play on a CD player. This long play time can easily reduce the life of the CD player. And if you use MP3 playback due to its own advantages of construction, you can play songs for a long time. It is suitable for headphones. Just start with soft music, let the headphones relax for 10-30 hours at lower volume, and then use ordinary music (except for rock and dance music) for 100-200 hours at medium volume; if you listen to high notes at this time Not harsh, natural and mellow, mid-range warm and friendly, the low frequency is no longer a rumbling rumbling, but full of details, it is basically done.

There are also people who like to use audio equipment such as computer speakers. Although this can use some specific software and specific audio CD.ç…² Headphones are more professional. However, Xiaobian does not recommend this method for beginners. Because many earphones that are now being repaired are broken when they are down. If you have more professional people around you, then you can try this kind of method. It is usually a white noise dish and a pink noise dish. Still others use some specific frequency generators. The advantage of using this method is that it allows the headset to enter the state quickly. The disadvantage is of course that it is easy to smash the headset if it is not handled properly.

Here's to recommend some music for everyone. In terms of vocals. Tsai Chin's and Faye Wong's voices are good. Recommended tracks are ferry, sky. salad. Brightman's Moon Goddess Enya's music is also good. In addition, Tengger’s vocal power and explosive power are also very suitable for playing the recommended track. Similar to the Eagle's California hotel is also more suitable for classical music. Yan Xuemin's “The First Drum of Yanhuang” is also a good dish for the wingman. In addition, the cover of Swans’ test tapes is very wide and is also very suitable for picking up headphones.