As soon as summer arrives, various ice-skating machines have emerged. What should households pay attention to? 1. For the shattered ice pellets, when flowing into the pan through the discharge port, pay attention to the discharge of the material at the discharge port and do not block it. Otherwise, it will cause the cutter to die and burn the motor. If it is found that the cutter disk is jammed, immediately lift the handle of the pressure cover, close the switch, remove the plug, and troubleshoot the problem in time.
2. The thickness of the ice particles can be achieved by adjusting the height of the cutter head protruding from the cutter head. Automatic ice shaver only needs to adjust the corresponding thickness switch. If it is semi-automatic, you must check the instructions for use. Some of them cannot be opened and adjusted freely. If it is possible, remove the plastic tray of the protective switch device first, loosen the screw fixing the elbow, pull out the cylinder, loosen the fastening screw of the cutter head, remove the cutter head, and then release The compression screw of the blade is installed in place according to the required requirements, and then the cutter plate, etc. can be put back in place.
3. The motor design has a truncation rate of 80%. Long-term continuous operation must be avoided. After one hour of continuous work, it should be suspended for twenty minutes before starting work. This will greatly extend the life of the motor.
4. Each use must be cleaned. When cleaning, turn off the main power switch, remove the plug, and then wipe off the water with a clean towel.
5. After cleaning, remember to lift the clamp handle. Cleaners are not allowed to use when cleaning to prevent contamination of cleaners left on the machine. Can not be washed directly with water, so as not to wet electrical components, affecting the safe use and damage to the machine.
6. Whether it is cleaning, overhaul, replacement of blades or cleaning of ice slag and other related work, should first turn off the power and unplug the power plug; do not allow the ice machine to run for a long time without load.
Nowadays, the function and appearance of mobile phones are similar, but the charging interface is not unified. The Android camp has Micro USB and Type-C ports, while the iPhone camp has Lightning. Different charging ports use different charging cables, which is very unfriendly for users who often need to use multiple phones. To solve this awkward situation, the three-in-one data cable was born. What is the three-in-one data cable? Three-in-one data cable means that one data cable includes Micro Usb Cable, USB Cable For Iphone and Usb Cable Type C. So one data cable can be used by all mobile phones.
Three-in-one data line is also known as multifunctional data cable. In the original data cable, the combination scheme is added, and the combination PCB is configured, which can support a variety of equipment and avoid the trouble of frequently looking for data line. It combines Lightning, a 30-pin port, and a Micro USB port, and is compatible with multiple devices. It can connect to any smartphone or tablet, including iPhone, iPad, Samsung, etc.
From the technical point of view, the three-in-one data cable does have a strong advantage. With continuous development and improvement, three in one data cable products in the original data cable appearance with woven cloth, will also add a light color on the three in one data cable, so that the data cable function is stronger and more exquisite, more and more people accept and buy. In the era of big data,the 3 In 1 Usb Cable can be said to have deeply affected our work and life. We believe that with the technical development of 3-in-1 mobile phone data cable, it will bring us more convenient transmission experience.
3 In 1 Usb Cable,3 In 1 Data Cable,3 In 1 Usb C Cable,3 In 1 Universal Cable
Henan Yijiao Trading Co., Ltd , https://www.yijiaousb.com