With the demand of the market, PLC has been applied to various industries such as food, chemical industry, agriculture, industrial aquaculture, etc., and in these industries there is a need for continuous and accurate measurement of materials, and Gumei Technology MX2N-24M is an optional PLC All the way weighing function realizes the application to industries with weighing requirements.
Instructions
1. Connect the PLC line, download the weighing routine to the PLC, and turn on the monitoring mode.
2. Close M0 in the monitoring mode, measure the zero point reading, and store it in D200.
3. Put a weight on the load cell (an object of known weight is sufficient), manually input the actual weight of the weight into D204, close M1, PLC will calculate according to the collected data and zero point reading to obtain the weight coefficient Store it in D212.
4. Start measurement, place the object to be measured on the load cell, PLC will calculate according to the data collected by the sensor and the weight coefficient, and finally the calculated weight result will be stored in D12.
PLC part program
Weighing procedure
Sensor wiring diagram
Load cell wiring
If you need a case program, you can download and test it from the official website of Shenzhen Gumei Technology Co., Ltd.
MX2N PLC can customize up to 12 channels of AD and 2 channels of DA in special batches, with a precision of 12 bits. Use RD3A to read AD data and WRA3 output DA data (up and down limits can be set); it supports optional RS485 or RS232 communication ports, Support programming port protocol and MODBUS-RTU master-slave protocol, can be switched through D8120 in the program, support RS485 networking, communication with inverters and other equipment, high-speed counting input conventional 6-channel single-phase counting (X0-X5) or 2 Channel AB phase counting (X0-X1/X3-X4) 10KHz; up to 6 channels of single-phase counting (4 channels 60KHz, 2 channels (2 channels 60KHz) can be specially customized; high-speed pulse output conventional 4 channels 20KHz, Y0/Y1/ Y2/Y3; 4 channels Y0/Y1 channels 200KHz, Y2/Y3 channels 100KHz can be specially customized. This product is an economical PLC developed by Gumei Technology. Customers in need can obtain information from the business.
Yuchai 401-999KW Diesel Generator
Yuchai 401-999Kw Diesel Generator,Yuchai Power Generator,Yuchai Diesel Genset,Yuchai Super Silent Power Generator
Shanghai Kosta Electric Co., Ltd. , https://www.ksdgenerator.com